Troubleshooting Guide
| ADDITIONAL PROBLEMS |
|
Symptom | Possible Cause | Remedy |
Excessive vibration.
Warped or damaged attachment.
Loose gearcase.
Bent main shaft/worn or damaged bushings.
Inspect and replace attachment as required.
Tighten gearcase securely.
Inspect and replace as necessary.
Cutting attachment will not move.
Shaft not installed in powerhead or gearcase.
Broken shaft.
Damaged gearcase.
Inspect and reinstall as required.
Consult with an authorized Shindaiwa servicing dealer.
Cutting attachment moves at engine idle.
Engine idle too high.
Broken clutch spring or worn clutch spring boss.
Adjust idle. Check Specifications page for correct idle speed.
Replace spring/shoes as required, check idle speed.
17
