VOLUME-BALANCE CONTROL
The AVC20 is equipped with 4
Volume Control
m
IvoLuME
Balance Control
RL
lnput Volume
Press the | upper | side | to simultaneously increase the volume of all four speakers. |
Press the | lower | side | to simultaneously decrease the volume of all four speakers. |
Volume increases faster than it decreases.
FR | FL: | lncreases the volume of the front left speaker. |
| |
| FR: lncreases the volume of the front right speaker. |
| ||
| RL: lncreases the volume of the rear left speaker. |
| ||
| RR: Increases the volume of the rear right speaker. |
| ||
| FRONT: Causes the surround image to slowly travel towards the front. | |||
,, | REAR: | Causes the surround image to slowly travel towards the rear. | ||
LEFT: | Causes the surround image to slowly travel towards the left. | |||
| RIGHT: | Causes the surround image to slowly travel towards the right. | ||
|
|
| When the volume of one of the four speakers reaches | |
|
|
| the maximum level, the | indicator flashes. When |
the volume of one of the four speakers reaches the
minimum level, the | indicator flashes. |
The lnput Volume control located behind the control panel door is used to set the maximum volume so that the volume of none of the speakers exceeds a certain level.
Adjusting the lnput Volume
@First set the INPUT VOLUME control to the mini- mum. (Number @ inside the control panel door)
@Use the Volume up control and set the AVC20 volume to the maximum (the If_l indicator will
flash), then bring it down 5 steps.
(Press the Volume down | button 5 short times) |
@Next gradually increase the lnput Volume until a
comfortable listening level is reached. This is described by the following diagram.
| w | Greatest volume which |
| can be produced by | |
|
| |
|
| the AVCZO |
| ||
LIMIT |
| the INPUT VOLUME |
This mark lights. |
| control. |
Volume you most frequently use. |
| |
- |
| |
LOWER |
| no sound is produced. |
|
| |
This mark lights. |
|
|
Dolby Surround and lnput Volume |
|
The output level on some VHD video disc players or laser disc players is quite high. When |
|
this is the case, DOLBY SURROUND sound may be distorted. Should this happen, lower |
|
the INPUT VOLUME. | INPUT |
| VOLUME |