USE OF WIRELESS REMOTE CONTROL
Avariety of operations are possible from a comfortable distance when, using the wireless remote control unit.
Remote Control Sensor
.When using the wireless remote control, always point it toward the remote control sensor on the AVC20.
This wireless remote control unit uses infrared rays. Exposure of the sensor on the AVC20 to strong fluorescent light or the like could result in malfunction. Locate the AVC20 t o minimize exposure to surrounding light.
.The wireless remote control unit should be used within vertical or horizontal angles of approximately 30' with respect to the sensor on the AVC20 at a distance up t o 7m (20ft).
'II \
A ~ A ~ ~ ~ ~ ~ ~ ~ ~ . ~ ,
600 meters
INSERTING BATTERIES
Remove the cover on the rear. | Insert two size "AA" batteries, pay close | ' 0 Replace the cover. |
| attention to the correct polarity I+and |
|
CAUTIONS ON BATTERIES
aUse size "AA" batteries.
Replace the batteries when distance of ope- ration decreases.
The replacement interval depends on the number of times used, but it is recommend- ed that the batteries be replaced at least once every year.
When not using the remote control unit for an extended period of time, remove the batteries.
Do not use an old battery with a new one or two batteries of different types (for example,
one dry cell and one alkaline battery), as this may result in leakage or damage to the unit. Should leakage occur, wipe thoroughly and insert new batteries.
Do not short circuit, disassemble, or throw batteries into flames.
Do not place objects on top of the remote control unit, as the batteries will wear out if a key is held down.
Always strictly observe cautions written on batteries.
Do not dispose of batteries together with flammable garbage (where applicable).
