4. Use of the Preset Volume Buttons
It is possible to place in the memory three different volume adjustment settings. When the optimal adjustment is reach- ed as shown in number 3 above, press the STORE button. (There is no need to keep it pressed in.) When this is
done, the PRESET VOLUME indicators ( , I,and ()on the AVC20 will flash. While the indicators are flashing (approximately 5 seconds), press one of the PRE- SET VOLUME buttons on the wireless remote control unit. The volume adjustment is now stored in the memory. Simply press the desired button to obtain the preset volume adjustment later on.
Avolume adjustment setting will remain stored in the memory for approximately one week after the power is turned off.
To change a preset volume adjustment setting, adjust the volume as desired, and follow the same procedure as in step 4 above. The previous setting in the memory will be erased.
The preset volume adjustment setting can only be obtained by using the remote control unit.
A
5. Use of Full Mute Button
Press this button when you wish to turn off the volume momentarily, such as when a visitor arrives unexpectedly or when the telephone rings. The FULL MUTE indicator W o n the AVC20 will flash. Press the button once again to return to the previous volume.
