Center Speaker
(3)MONO OUT
Many audio/video systems are set up with a television centered between two speakers. Sometimes, however, if the speakers are located far away from the tele- vision, the resultant center localization can become confusing.
To provide better center localization, connect one of the AVC20'smono outputs to an external amplifier and speaker, placing the speaker under, or as close as possible to, the television.
Use a shielded magnet type speaker as the center speaker, and keep as close as possible to the monitor screen for best results.
When using a monophonic main amplifier as the cen- ter channel, use the AVC20'sMONO output terminal for best results.
(4) Use of Input/Output Terminals - 1
It is possible to add a different audio source to video software. It is also possible to dub onto a video deck using a different audio source.
Connect as shown in the diagram.
@Connect a playback video component (for example, a video disc player) to the
Connect an audio component, such as a compact disc player or cassette deck to the m]input termi-
nals.
When theselector button of the front panel is depressed, the image from the video component connected to 1appears on the monitor. The sound of the component connected to the m l termi- nals is produced from the speakers. The audio signal from the TAPE input overrides the audio signal from AV INPUTS 1.2, and 3.
This can be recorded on to a video deck connected to the output of either
Center Speaker
Center Arnpl~fier
SPEAKER
With Input on the Left Channel The left speaker output produces sound.
(5) Use of Input/Output Terminals - 2
These can be used as input/output terminals for a signal processor such as a graphic equalizer.
Connect as shown in the diagram.
Depress one of the
then depress the button.
Control by the signal processor is possible.
Refer to the signal processor instruction manual for details on i t s use.
