(2)Using as Surround Processor
The AVC20 can be used by disconnecting both the front and rear
To use the AVC20 as a surround processor with different main amplifiers, remove the four short pins as shown in the diagram, and use pin cords to connect the PRE OUT termi- nals to the input terminals of the other amplifiers.
When this is done, the AVC20 volume control can be ope- rated, but the volume of the other amplifiers must be increased to a suitable level. The AVC20 amplifiers can also be used by connecting Aux level outputs of audio devices to the MAIN inputs.
S P E A K E R SYSTEMS-
Connect the AVC20 PRE OUT terminals to the input terminals of the other amplifiers using cables with phono plugs at the AVC20 side and appropriate connectors a t the amplifier side.