Shure AVC20 owner manual Refer to page 3 for more detailed information

1. SURROUND-SOUNDEFFECT SELECTION

The AVC20 provides a choice of 3 surround effects, depending upon the program or software being viewed.

	For programs for which the surround effect is not nece-
	ssary, such as news broadcasts, press the BYPASS but-
-1-	ton. Sound can be heard from the front speakers only.
	Press this button for movies, etc.
- 1 - 1	Press this button for sports programs etc.

m JCONCERTI- Press this button for concerts or old movies.

*Refer to page 3 for more detailed information.

2. Use of Volume Button

First press the RESET button (there is no need to keep it

pressed down), then press the side of the VOLUME button. When held down, the volume gradually increases. If the volume becomes too loud, press the m s i d e . When the desired volume is reached, release the button.

3.Adjusting Volume Balance

From the listening position, adjust the volume balance, using the controls described below, to feel engulfed from all sides while maintaining a good front stage orientation. Readjust the overall volume.

.=]I . . . . . .Causes the surround image to slowly travel towards the front.

1 - . . . . . . .Causes the surround image to slowly travel towards the rear.

. . . . . . .Causes the surround image to slowly travel towards the left.

. . . . . . .Causes the surround image to slowly travel towards the right.