TIWAY I Overview
1-6 SIMATIC TIWAY I Series 500 NIM User Manual
TIWAY I System Overview (continued)The Series 500 NIM provides several features which ensure maximum
network signal integrity.
•Each communication port is provided with a “jabberstop” circuit to
disable the port’s transmitter in the event of a communication port
failure. Such failures can cause continuous network transmission
which would dominate the communication channel.
•Built–in self tests guard against failure of the NIM itself. Chapter 3
provides a complete description of these built-in tests.
To date there have been four releases of Series 500 NIM software.
Releases 2.1, 2.2, and 3.0 provide enhancements to release 1.1.
Release 1.1 — initial release that provides basic primitive and data type
support for 520 and 530 controllers. In this release, the data element range
configuration is fixed.
Release 2.1 — contains all capability of release 1.1 and adds the following:
•Extended addressing
•Automatic data element range configuration
•Support for the 560/65 controllers
•I/O force data types
Release 2.2 — contains all capability of release 2.1 and adds the following:
•Support for CR force operations
Release 3.0 — contains all capability of release 2.2 and adds the following:
•Program upload/download support
•Allows data type 35 (loop mode) to be read or written
•Minor software error corrections
If the product release level does not appear on the product I.D. label, call
the Siemens Technical Services Group at (423) 461–2501 for assistance.
They will need the unit serial number to determine the release level.
Series 500 NIM
Features
Series 500 NIM
Software Releases