Siemens ESM technical specifications Properties of the OSM ITP62-LD

Introduction

Properties of the OSM ITP62-LD
Electrical ports	6 x 10/100 Mbps
	autonegotiation/autocrossover ports
	ITP connectors (sub-D 9-pin female)
Optical ports	2 x 100 Mbps FO ports (full duplex)
	BFOC female connectors
Maximum distance between two OSMs	26 km (monomode fiber)
Maximum ring span with 50 OSM	1300 km
ITP62-LD
Digital Inputs	8 x DC 24V

Note

Industrial Ethernet OSM ITP62-LD is available in two versions:

•OSM ITP62-LD with eight digital inputs:

The eight digital inputs are connected over two plug-in 6-pin terminal blocks on the top of the device. To display the status of these inputs using the eight device LEDs, there is an additional display mode known as the "Input Status" that is selected using a third mode LED.

•OSM ITP62-LD without digital inputs:

There are no digital inputs and the "Input Status" display mode is not available. The operating states are displayed by two mode LEDs.

10	Industrial Ethernet OSM/ESM
	C79000-Z8976-C068-10