Interfaces, Displays and Operator Controls
4.2.3Port LEDs
The port LEDs indicate the operating states of the individual ports of the OSM/ESM. On the OSM/ESM variants with digital inputs, the state of the inputs is also indicated by the port LEDs. To allow this, the OSMs/ESMs have an additional display mode. The display mode of the port LEDs can be changed using the Select/Set button on the front panel of the OSM/ESM allowing all operating states to be displayed. The current display mode is signaled by the display mode LEDs.
Display mode | Meaning | |||
Port Status |
|
| Port LED | |
|
|
| - Not lit: No valid connection to the port | |
Display |
|
| (for example station turned off or cable | |
|
|
| not connected) | |
3 | 2 | 1 | - Lit green: Valid connection | |
- Flashes green (once per period): Port | ||||
|
|
| ||
LED off | LED off | LED off | switched to standby | |
- Flashes green (twice per period): Port is | ||||
|
|
| segmented | |
|
|
| - Flashes green (three times per period): | |
Note |
|
| Port is turned off | |
LED 3 exists only on devices with digital | - Flashes green (four times per period): | |||
inputs. |
|
| Port is mirrored | |
|
|
| - Flashes/lit yellow: Data reception on this | |
|
|
| port | |
100 Mbps |
|
| Port LED | |
Display |
|
| - Lit green: Port operating at 100 Mbps | |
|
| - Not lit: Port operating at 10 Mbps | ||
3 | 2 | 1 |
| |
LED off | LED off | LED on |
| |
Note |
|
|
| |
LED 3 exists only on devices with digital |
| |||
inputs. |
|
|
| |
|
|
|
| |
58 | Industrial Ethernet OSM/ESM |
