©
Siemens AG 2003, M:\Mobil\R65\CF62_TMO\en\sug\A65_Phone.fm
23Calling
VAR Language: en; VAR issue date: 040413
left page (23) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)
Calling

Dialing with number keys

Open the clamshell to access the
keypad.
The phone must be switched on
(standby mode).
JEnter number (always
with area code/interna-
tional dialing code).
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
APress the Call key. The dis-
played phone number is
dialed.

End call

BPress the End key briefly.
Press this key even if the
person on the other end
has hung up first.

Set volume

GUse the top part of the
navigation key to start
adjusting the volume.
Then press top/bottom to
adjust the volume as
required (onlypossible
during a conversation).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.

Redial

To redial numbers that were dialed
previously:
APress the Call key once.
ISelect the required phone
number from the list,
then to dial ...
APress ...

If the number is busy

Auto. redial
§Auto Dial§ Press. The phone number
is automatically dialed ten
times at increasing time
intervals.
Callback b
§Callback§ Press. Your phone rings
when the busy number is
free.
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after
15minutes.
International dialing codes
0Hold down until a "+" is dis-
played.
§Country§ Press and select country.