©
Siemens AG 2003, M:\Mobil\R65\CF62_TMO\en\sug\A65_Startup.fm
15Getting started
VAR Language: en; VAR issue date: 040413
left page (15) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)
Getting started

Insert SIM card/battery

The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. Ifthe SIM card has been
delivered incredit card size, snap the
smaller segment out and remove
any rough edges.
Press grooved area 1, then remove
the cover downwards in the direc-
tion of the arrow 2.
• Place the SIM card in the slot with
the contact surface facing down-
wards. Gently push the holder tab
over the SIM card 3 (ensure the
beveled corner is correctly posi-
tioned).
• Insert the battery into the phone
sideways 4, then press down-
wards 5 until it snaps into place.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place cover on phone and then
push towards the upper edge,
until it clicks into place 6.
1
2
3
Additional information
Please switch off your phone before
removing the battery!
3V and 1.8 V SIM cards are supported.
Please contact your service provider if
youhave an older card.
SIM card problems.......................page 63
4
5
6