Siemens Mobile operating instructions Dynamic Light

left page (47) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)

Settings 47

VAR Language:

Illumination

The illumination for the color display and the 2nd display can each be set independently.

Color Display

Set display light brighter/darker. The darker the setting the longer the standby time.

2nd Display

Switch the display light on or off.

Contrast

Set color display contrast.

Dynamic Light

§Menu§ KmKDynamic Light

KSelect function.

Show Light Effects

This enables you to switch the visual signal on and off centrally for all functions and events.

Play Demo

All flash rhythms are displayed in sequence. End with §Cancel§. Show next flash rhythm with §Next§.

Brightness

This enables you to set the bright- ness for the visual signal.

dCalls, Group Calls, Other Calls

You can assign different flash rhythms to the relevant call types and to each group.

en; VAR issue date: 040413

© Siemens AG 2003, M:\Mobil\R65\CF62_TMO\en\sug\A65_Setup.fm

The dynamic light consists of 7 LEDs at the edge of the keyboard (page 12).

It is used to indicate visually different events and functions, as well as the current phone status (e.g. network searching, battery low, etc.).

You can set the visual signal (LEDs) on the phone for certain functions and events. The LEDs then flash in different rhythms depending on the current function.

You can also create your own flash rhythms.

During Call

Select a flash rhythm to flash during the call.

Alarms

Select a flash rhythm to signal an alarm or appointment.

More Light...

Set the flash rhythm for other functions or events:

Incoming messages, Missed Event, During Sending, Opening Clamshell, Closing Clamshell, Net Search, Screensaver, Low Battery, Switch On, Switch Off, Charging