RAID system, 4MS08NVV | Siemens PCIL43 specification

Commissioning 7.3 Notes on operation

7.3.4RAID system

This is a RAID1 system configuration (mirroring with two hard disks). This enables the system to continue to operate when there is a problem with a faulty hard drive or cable in a channel and therefore increases the availability of the system.

Note

You can find information regarding Intel RAID controllers in the RAID documentation on the supplied "Documentation and Drivers" CD in the Drivers\RAID\Intel directory.

Intel(R) Matrix Storage Manager option ROM v5.0.3.1001 ICH7R wRAID5

Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.

RAID Volumes:		Level	Strip	Size	Status	Bootable
ID	Name
0	Volume0	RAID1(Mirror)	N/A	111.8GB	Normal	Yes
Physical Disks:		Serial #		Size	Type/Status(Vol ID)
Port Drive Model
0	ST3120026AS	4MS08NS5		111.8GB	Member Disk(0)
2	ST3120026AS	4MS08NVV		111.8GB	Member Disk(0)

Press <CTRL-I>to enter Configuration Utility...

SIMATIC Rack PC IL 43	7-5
Operating Instructions, Edition 09/2005, A5E00432875-01

Image 37

Siemens PCIL43 manual RAID system, 4MS08NVV

Contents

Operating Instructions Edition 09/2005 SimaticPage Operating Instructions Edition 09/2005 Industrial PC Rack PC IL Safety Guidelines Table of contents 10-1 Glossary Glossary-1 Table of contents Preface Introduction Guide for the operating instructions Contents format Table of Contents General safety instructions Safety informationRepairs System expansions ESD guidelines Battery Overview Description Highlights Areas of applicationHighlights General features FeaturesFunction Interfaces Optional accessoriesMonitoring functions Standard versions DVD ROM Optional accessories Disk drivesOptional expansions External structure DesignFront view of the device Pos Description Rear view of the device Pos Description Operator control on/off button Pos Description Operator controls Interfaces Connecting elementsLayout of the interfaces on the rear of the device Pos Name Description Position of the IEC power plug Description Power supplyStatus displays Status displays Display Meaning Description 3.6 Design Transport Deployment planningUnpacking and checking the delivery unit Unpacking the device Device equipment Noting the device identification data Ambient and environmental conditions Deployment planning Ambient and environmental conditions Installing the device InstallationPossible areas of installation Possible mounting methods Installation Installing the device Connecting peripherals Connecting To be noted before you connect the device Connecting the device to power Steps for connecting the device to mains ConnectingLocalized information Steps in securing the power plug Secure the power plug Commissioning Basic commissioning initial power-upPrerequisites for commissioning Burner/DVD player software Switch off the device Burner software DVD burner Removable hard disks RAID Software Sata interface Installation locationReplacing a hard disk SATA1 4MS08NVV RAID system Functions for RAID system management Replace faulty drive in RAID system Comments about faults Side panel Associate new hard drive Commissioning Ethernet IntegrationFurther information Integration Temperature monitoring Temperature monitoring/displayFunctions Overview of the following monitoring functions Fan monitoring Watchdog WDFunction Open the device Expansions and configurationTools Preparation Steps for opening the enclosure cover Open the device Steps for opening the device front Memory expansion Installing expansion cardsMemory expansion options Installing expansion modules Installing an expansion moduleSteps for installing an expansion module Options of installing disk drives Installing disk drivesInstalling and removing a disk drive or removable rack Pos Description Steps for removing the drive carrier module Removing the drive carrier module Disk drive or removable disk rack installation Installing and removing a hard diskInstalling a disk drive Steps for installing a disk drive Removing and installing hardware components Maintenance and serviceRepairs Carrying out repairs To be noted before you replace the battery Replacing the backup batteryReplacing the battery Reconfiguring the Bios Setup Disposal Removing the power supply module Removing the power supply moduleHow to remove the power supply module Removing the motherboard How to remove the motherboardRemoving the motherboard Preparing for equipment fan exchange Remove filter and device fanRemove filter and fan Steps Installing the fan Processor replacementHow to remove the processor Removing the processor 11-7 General installation procedure Reinstalling the softwareRecovery CD Restore DVD Booting with the CD Recovery Installing WindowsRestoring the factory state Setting up partitions Setting up the partitions for Windows operating systems Format primary partition Installing Microsoft Windows operating systems Setting up the language selection for Windows 2000 MUI Setting up the language selection for Windows 2000 MUI Installing drivers and software Maintenance and service Reinstalling the software General problems TroubleshootingProblem Possible cause To correct or avoid error Problems when using modules of third-party manufacturers 13.1 General specifications Technical dataGeneral technical data Safety Climatic Conditions Special FeaturesMech. Ambient conditions Motherboard COM1 Graphics Status displays LEDs Certifications AC voltage supply Power requirements of components maximum valuesStandard system Output voltage Technical data of the telescopic rails Dimensional drawing of the device Dimensional drawings Dimensional drawing for the use of telescopic rails Dimensional drawing for the use of telescopic rails Motherboard Detailed descriptionsSystem resources Tab Option Setting Bios Setup Guidelines and declarations DIN ISO 9001 certificate Certificates and approvalsSoftware License Agreement Certification for the USA, Canada and Australia EMC Further support Service and supportTraining center Technical Support Service & Support on the Internet Retrofitting instructions Figure A-1 For the temperature range 5 to 35 C What does ESD mean? ESD Guidelines Figure B-1 Electrostatic voltages on an operator Electrical charge Abbreviation Term Definition Abbreviations CLK CGACmos COA Eide FAQEisa EMM IEC IDEIgbt Irda PCI PataPcmcia PIC Scsi SataSdram Selv WAV VRMWlan WWW Abbreviations Glossary Booting Boot disketteConfiguration files Configuration software Controller Device configurationDisc-at-once Drivers Gender changer FormattingHard disks Hub Legacy USB support IT networksLicense key License key diskette Motherboard PasswordOperating system Packet writing Restore CD ResetPixel Remove module bracket Troubleshooting Setup Bios SetupSerial interface Session at once Wlan Windows Glossary-10 CD-R / CD-RW Index Index Index VGA Page Siemens AG