Installing an expansion module | Siemens PCIL43 instruction

Expansions and configuration 10.3 Installing expansion cards

10.3.2Installing an expansion module

Preparation

Isolate the device from mains

Installing expansion modules

Steps for installing an expansion module:

1Open the device.

2Remove the fastening screws (1) and lift out the module bracket (2)

3Remove the relevant steel slot cover

(3).

4Insert the expansion module (4) into the relevant slot.

5Screw down the steel slot cover (3) for the expansion module.

6Insert the module bracket again.

7Loosen free module bracket (5), mount and screw down on the expansion module

8Close the device.

SIMATIC Rack PC IL 43	10-5
Operating Instructions, Edition 09/2005, A5E00432875-01

Image 51

Siemens PCIL43 Installing an expansion module, Installing expansion modules, Steps for installing an expansion module

Contents

Operating Instructions Edition 09/2005 SimaticPage Operating Instructions Edition 09/2005 Industrial PC Rack PC IL Safety Guidelines Table of contents 10-1 Glossary Glossary-1 Table of contents Preface Introduction Guide for the operating instructions Contents format Table of Contents System expansions Safety informationGeneral safety instructions Repairs ESD guidelines Battery Overview Description Areas of application HighlightsHighlights Features General featuresFunction Standard versions Optional accessoriesInterfaces Monitoring functions Optional accessories Disk drives DVD ROMOptional expansions Rear view of the device Pos Description DesignExternal structure Front view of the device Pos Description Operator control on/off button Pos Description Operator controls Pos Name Description Connecting elementsInterfaces Layout of the interfaces on the rear of the device Status displays Display Meaning Power supplyPosition of the IEC power plug Description Status displays Description 3.6 Design Unpacking the device Deployment planningTransport Unpacking and checking the delivery unit Device equipment Noting the device identification data Ambient and environmental conditions Deployment planning Ambient and environmental conditions Possible mounting methods InstallationInstalling the device Possible areas of installation Installation Installing the device Connecting peripherals Connecting To be noted before you connect the device Connecting the device to power Connecting Steps for connecting the device to mainsLocalized information Steps in securing the power plug Secure the power plug Basic commissioning initial power-up CommissioningPrerequisites for commissioning Burner/DVD player software Switch off the device Burner software DVD burner SATA1 RAID Software Sata interface Installation locationRemovable hard disks Replacing a hard disk 4MS08NVV RAID system Functions for RAID system management Replace faulty drive in RAID system Comments about faults Side panel Associate new hard drive Commissioning Integration EthernetFurther information Integration Overview of the following monitoring functions Temperature monitoring/displayTemperature monitoring Functions Watchdog WD Fan monitoringFunction Preparation Expansions and configurationOpen the device Tools Steps for opening the enclosure cover Open the device Steps for opening the device front Installing expansion cards Memory expansionMemory expansion options Installing an expansion module Installing expansion modulesSteps for installing an expansion module Pos Description Installing disk drivesOptions of installing disk drives Installing and removing a disk drive or removable rack Steps for removing the drive carrier module Removing the drive carrier module Steps for installing a disk drive Installing and removing a hard diskDisk drive or removable disk rack installation Installing a disk drive Carrying out repairs Maintenance and serviceRemoving and installing hardware components Repairs Disposal Replacing the backup batteryTo be noted before you replace the battery Replacing the battery Reconfiguring the Bios Setup Removing the power supply module Removing the power supply moduleHow to remove the power supply module How to remove the motherboard Removing the motherboardRemoving the motherboard Steps Remove filter and device fanPreparing for equipment fan exchange Remove filter and fan Removing the processor Processor replacementInstalling the fan How to remove the processor 11-7 Restore DVD Reinstalling the softwareGeneral installation procedure Recovery CD Installing Windows Booting with the CD RecoveryRestoring the factory state Setting up partitions Setting up the partitions for Windows operating systems Format primary partition Installing Microsoft Windows operating systems Setting up the language selection for Windows 2000 MUI Setting up the language selection for Windows 2000 MUI Installing drivers and software Maintenance and service Reinstalling the software Troubleshooting General problemsProblem Possible cause To correct or avoid error Problems when using modules of third-party manufacturers Safety Technical data13.1 General specifications General technical data Motherboard Special FeaturesClimatic Conditions Mech. Ambient conditions COM1 Graphics Status displays LEDs Certifications Output voltage Power requirements of components maximum valuesAC voltage supply Standard system Technical data of the telescopic rails Dimensional drawing of the device Dimensional drawings Dimensional drawing for the use of telescopic rails Dimensional drawing for the use of telescopic rails Detailed descriptions MotherboardSystem resources Tab Option Setting Bios Setup Guidelines and declarations Certification for the USA, Canada and Australia Certificates and approvalsDIN ISO 9001 certificate Software License Agreement EMC Technical Support Service and supportFurther support Training center Service & Support on the Internet Retrofitting instructions Figure A-1 For the temperature range 5 to 35 C What does ESD mean? ESD Guidelines Figure B-1 Electrostatic voltages on an operator Electrical charge Abbreviation Term Definition Abbreviations COA CGACLK Cmos EMM FAQEide Eisa Irda IDEIEC Igbt PIC PataPCI Pcmcia Selv SataScsi Sdram WWW VRMWAV Wlan Abbreviations Glossary Configuration software Boot disketteBooting Configuration files Drivers Device configurationController Disc-at-once Hub FormattingGender changer Hard disks License key diskette IT networksLegacy USB support License key Packet writing PasswordMotherboard Operating system Remove module bracket ResetRestore CD Pixel Session at once Setup Bios SetupTroubleshooting Serial interface Wlan Windows Glossary-10 CD-R / CD-RW Index Index Index VGA Page Siemens AG