Monitoring and diagnostics24
Overview device functions
Motor contactor with RLT
■
Tried and tested SIRIUS technology
■
3 sizes S6, S10, S12 (55 to 250 kW at 400 V)
■
Can be used up to 60 °C without derating
■
Long electrical service life
■
Replaceable main current contacts
■
LED display of the remaining life time of the main current
contacts (60%, 40%, 20%)
■
With 20% or less remaining life time, a message is sent via
AS-Interface
■
Connection via AS-Interface
SIRIUS compact starter and
infeed system for 3RA6
■
Compact starter up to 32 A as direct and reversing starter,
45/90 mm wide
■
Only one weld-free clearance, instead of circuit breaker,
contactor, and overload relay
■
Electronic trigger with wide setting range 1:4 (5 versions)
■
Integrated overload function with differentiated fault message
■
Infeed system up to 70 mm² and 100 A
■
Connection via AS-Interface
SIRIUS motor starter M200D
– innovative solution for dis-
tributed drive technology
■
Degree of protection IP65 allows application-oriented setup
without a control cabinet
■
Protects, switches, and monitors the motor and application
■
Parameterization via STEP 7 HW Config
■
Connection to AS-i, PROFIBUS, and PROFINET
■
Little variance for all motor starter versions
■
Manual operation and main switch are integrated
3RW44 soft starter
■
Electronically controlled start-up and coasting of asynchro-
nous motors
■
Integrated jumper contact system
■
Integrated motor overload intrinsic device protection
■
Adjustable current limiting
■
Integrated status and fault monitoring
■
Torque control
■
Integrated braking function (superimposed DC braking)
■
Compact design
■
5 sizes for the power range from 15 to 710 kW
■
Recording the active power
■
Connection via PROFIBUS
SIMOCODE pro 3UF7
■
Intelligent connection of distributed drives to the control level
■
Autonomous function without PLC or bus
■
Comprehensive monitoring functionality
■
Graphical parameterization
■
Analog inputs/outputs for application monitoring
■
Integrated inputs/outputs for motor and application monito-
ring
■
Can be used for all motor applications
■
Flexible motor management system with integrated protec-
tion, control and monitoring functions
■
Intelligent pre-processing is possible
■
Modularly expandable system
■
Outputs for activating motor contactors
■
Connection via PROFIBUS
■
can also be used for safety functions (locally or via PROFIsafe)
Maintenance_PA_04_2010_en.book Seite 24 Dienstag, 6. September 2011 9:45 09
© Siemens AG 2011