Siemens SL 740 SMS (text messages), Writing/sending text messages, Rules, Note:, Requirements:, Please remember:, Writing/sending text messages

SMS (text messages)

Your telephone is supplied ready for sending text messages.

Requirements:

uCalling Line Identification is enabled for your phone line.

uYour network supplier supports SMS text messaging within the fixed net- work (your network provider can give you information about this).

uYou are registered with your service provider for sending/receiving text messages.

Text messages are exchanged between SMS centres that are operated by service providers. You have to enter the SMS centre for sending and receiving text messages in your telephone. You can receive text messages from all of the SMS centres entered if you are registered with your service provider.

Your text message is sent through the SMS centre that is entered as the Service Centr.1 (send service centre). However, you can activate any other SMS centre as the active send service centre to send a current message (p. 27). Note that the next text message you write will be sent automatically through SMS Centre No. 1 again.

How to enter text is described from page 60. The EATONI (p. 60) predictive text feature helps you write your message

Rules

uA text message can be up to 612 characters long.

uIf your text is longer than 160 characters or you send large picture data, it will be sent as a linked message (up to four messages with 153 characters each).

Please remember:

uWhen the SMS function is active the first ring is suppressed.

SMS (text messages)

uNo network blocks must be set.

uIf your phone is connected to a PABX, please turn to page 28.

uTo receive text messages you must be registered with your service provider.

Writing/sending text messages

Writing/sending text messages

¢ ¢

v¢î SMS (Mailbox, mailbox-PIN)

Mailbox 1 If necessary, select a mailbox and press OK.

~If required, enter the PIN and press OK.

Write Message

Select and press OK.

~Write text message.

©	Press the display key.
Send	Select and press OK.
SMS	Select and press OK.

s/ ~ Enter or select number from

	the directory. Enter the
	number with prefix (even in
	the same area). Sending a text
	message to an SMS mailbox:
	Add mailbox ID to the end of
	the telephone number.
©	Press the display key.
Send	Select and press OK.
	The message is sent.

Note:

If a call arrives while you are writing a message, then the message is automatically saved to the draft message list.

21