Preparing to use the telephone
Please remember:
uKeep the power supply unit plugged in at all times to ensure your phone is ready for use whenever you need it.
uIf ever you purchase a phone cord from a store, ensure that the phone conductors are correctly connected
Internal phone jack connections:
3 |
|
|
|
| 4 | 1 | unassigned | ||||
2 |
|
|
|
|
|
|
|
| 5 | 2 | unassigned |
1 |
|
|
|
|
|
|
|
| 6 | 3 | a |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| 4 | b |
|
|
|
|
|
|
|
|
|
| 5 | unassigned |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| 6 | unassigned |
|
|
|
|
|
|
|
|
|
| ||
Preparing to use the handset
Inserting the battery
Caution:
Use only the rechargeable battery recommended by Siemens on page 58! Never use conventional batteries (non- rechargeable) or other types of rechargeable battery as this may cause significant damage to health and property. For example, the jacket of the battery could be destroyed or the battery could explode. The phone could also malfunction or be damaged.
1.Insert the battery the right way round and make sure it sits properly.
2.Position the battery cover at a slight angle and slide it with the two lower lugs into the case. Then push the cover towards the camera until it closes with a click.
Opening the battery cover
1.Hold the handset with the keypad facing down.
2.Place the thumb of the other hand on the mirror near the loudspeaker (a) and with the index finger of the same hand press the grooved area on the handset (b).
a b
3. Lift the cover.
6