Your caller on the telephone cannot hear you.

You have pressed the 9key. This mutes the handset£ .

Switch on the microphone again (p. 11).

The caller’s telephone number is not displayed although CLIP is set.

Calling£ line identification is not enabled.

The caller should ask his network provider to enable the identification of his number (CLI).

You hear an error tone when keying an input

(a descending tone sequence)

The action has failed or the input is incorrect£ .

Repeat the action or input.

Watch the display and if necessary refer to the operating instructions.

You cannot receive/send any MMS messages

1.Mobile phone operators and fixed network providers of MMS services have no agree-

ment£ to work together.

Contact your fixed network MMS provi- der for more information.

2.Your telephone is stored with your MMS pro- vider as having no fixed network MMS func- tionality, i.e. you are no longer registered

with£ the provider.

Register the terminal (again) for MMS reception.

You cannot listen to the network mailbox.

Your£ phone system is set for pulse dialling.

Set your phone system to tone dialling (p. 55).

2. The£ system PIN is still set to "0000".

Set system PIN that differs from 0000 (p. 52).

Display does not change to view mode¢when you open the camera function (v ë)

There£ is insufficient memory.

Delete no longer required data in the File Manager (page 36) or MM lists (page 32).

Appendix

Service (Customer Care)

Our Online Support on the Internet:

www.siemens-mobile.com/ gigasetcustomercare

In some countries repair and replace services are impossible where the products are not sold through our authorised dealers.

Your Gigaset is designed for operation in your country, as indicated on the packaging and on the device itself. Country-specific conditions have been taken into account. If you have any questions about the differences between the public phone networks, please contact your specialist dealer or network provider.

The CE mark attests to the phone's compliance with the essential requirements of the R&TTE directive.

Excerpt from the original declaration:

"We, Siemens AG, declare, that the above mentioned product is manufactured according to our Full Quality Assurance System certified by CETECOM ICT Services GmbH with ANNEX V of the R&TTE-Directive 99/5/EC. The presumption of conformity with the essential requirements regarding Council Directive 99/5/ EC is ensured"

Senior Approvals Manager

The Declaration of Conformity (DoC) has been signed. In case of need, a copy of the original DoC can be made available via the company hotline.

57