Changing the name of the base station

The names "Base station 1" to "Base station 4" are assigned automatically. The name of the base is handset-dependent, i.e. the base station receives the name which was assigned by the handset. The same base station can have different name on different handsets. You can change the name of your base station.

v¢Ð¢Handset ¢Select Base

sSelect base station and press

Edit.

~Enter a new name with up to 16 -characters (p. 60).

Save

Now press the display key to

 

save the setting.

Repeater support

With a repeater you can increase the range and reception strength of your base station; the repeater must be registered. To use the repeater you must first activate the repeater mode. This will cancel any calls that are in progress.

v¢Ð¢Base ¢Add. Features

Repeater Mode

Select and press OK.

Yes

Press the display key.

Base station settings

Restoring the base station to factory settings

When the settings are restored the handsets are still registered. The following settings are not reset:

uSystem PIN

u"First ringer tone suppressed" setting

uSMS information services

v¢Ð¢Base ¢Base Reset

~Enter system PIN and press OK.

Yes

Press the display key.

For factory setting see page 58.

53