Siemens SL 740 Setting the Walk and Talk mode, Changing previously set external "call to" numbers, Changing a previously set internal "call to" number

Operating more than one handset

Changing previously set external "call to" numbers

v¢í¢Room Monitor

sScroll to the Call to: line.

Edit	Press the display key.

XDelete existing number. Enter the external destination number:

~Enter the new number.

©	Press display key to open
	menu.

Save Entry Select and press OK. The entry is stored.

You can also enter an internal number as the "call to" number: INT ¢s(Select handset) OK.

Continue as described on page 43 starting with step 4.

Changing a previously set internal "call to" number

v¢í¢Room Monitor

sScroll to the Call to: line.

Edit	Press the display key.
Yes	Press the display key to
	confirm the prompt.
Edit	Press the display key. The input
	field for the phone number is
	opened.

Enter an external number as the "call to" number:

~Enter number.

©	Press display key to open
	menu.

Save Entry Select and press OK. The entry is stored.

You can also enter an internal number as the "call to" number: INT ¢s(Select handset) OK.

Continue as described on page 43 starting with step 4.

Deactivating the room monitor remotely

Take the call from the room monitor and press the 9;keys. The room monitor function will deactivate around

90 seconds after the call ends. After this, the room monitor will make no further calls. The other room monitor functions on the handset (e.g. no ringer) will remain activated until you press the display key Off on the handset.

To reactivate the room monitor function with the same telephone number, you must turn on the activation again and save with Save.

Setting the Walk and Talk mode

The Walk and Talk function allows two handsets to communicate with each other no matter how far they are from the base station.

Example: You go on holiday and take two handsets with Walk and Talk functionality with you. Set the Walk and Talk function on both handsets.

Precondition:

uBoth handsets have been registered to the same base station or

uBoth handsets are registered to different base stations and both are set to Best Base (p. 41) or

uOne of the handsets is not registered to any base station and the registered handset is set to Best Base or

uNeither handset is registered to a base station.

Please remember:

uThe maximum range between handsets in Walk and Talk mode is 300 metres outdoors.

uThe handsets cannot be reached by incoming calls.

uHandset operating times are severely curtailed in Walk and Talk mode.