Siemens SPC3 manual Symbol Min Typ Max AMI-Vers, 13.65, 13.90, 14.15, 10.00, 10.10

PROFIBUS Interface Center SPC3

Symbol	Min				Typ			Max
	AMI-Vers.	ST-Vers.		AMI-Vers.		ST-Vers.	AMI-Vers.		ST-Vers.
A	-		-	2.13		-	2.35		2.45
A1	0.10		0.25	0.15		-	0.25		-
A2	1.95		1.90	2.00		2.00	2.10		2.10
D	13.65		13.65	13.90		13.90	14.15		14.15
D1	9.90		9.90	10.00		10.00	10.10		10.10
E	13.65		13.65	13.90		13.90	14.15		14.15
E1	9.90		9.90	10.00		10.00	10.10		10.10
L	0.65		0.78	0.80		0.88	0.95		1.03
e BASIC	-		-	0.80		0.80	-		-
B	0.30		0.30	-		0.35	0.45		0.40
c	0.13		-	-		-	0.23		0.17
α°	12		-	-		10	16		-
β°	0		0	-		-	7		7
γ°	0		1	-		5	-		9
G	0.13		-	-		0.20	-		-
H	-		-	1.95		-	-		-
J	-		-	0.30		0.30	-		-
K	0.40		-	-		-	-		-
2H (Footprint)	-		-	3.90		3.90	-		-

8.5.8 Processing Instructions

ESD protective measures must be maintained for all electronic components.

SPC3 is a cracking-endangered component that must be handled as such.

A drying process must be carried out before SPC3 is processed. The component must be dried at 125o C for 24 hours and then be processed within 48 hours. This drying process may be carried out once only because the component is soldered.

It must also be ensured that the SPC3’s connections are not bent. Flawless processing can be guaranteed only if a planity of less than 0.1 mm is ensured. SPC3 is released for infrared soldering with a soldering profile according to CECC00802.

Page 56	V1.3	SPC3 Hardware Description
2003/04		Copyright (C) Siemens AG 2003. All rights reserved.