Configuring the Advanced Settings

The SSID is shown in the SSID field if there is a connection with the repeater. The radio channel used for data transfer is shown in the Channel field.

The Signal strength shows the strength of the connection to the repeater in percentage terms if there is a connection to the repeater.

ìClick Refresh to update the display.ìClick Add to add the data of another repeater.

ìApply the settings by clicking OK.

Setting up Internet telephony (VoIP)

Your Gigaset SX541 WLAN dsl enables you to make telephone calls via the Internet using an analogue phone connected to the Gigaset SX541 WLAN dsl. To do this, you require access authorisation from your service provider and the relevant access data. You must enter this data and other configuration settings for making calls in the VoIP (Voice over IP) menu in the Advanced Setup.

The menu comprises the following entries:

uVoIP settings: Enter the basic data from your service provider here (see page 105). u Extensions: Set functions here for two extensions(see page 107).

uDialing rules: Specify numbers here that are to be called only via the fixed network or only via the Internet. You can block numbers completely (for example 0190 num- bers) or enter a call-by-call provider for the fixed network (see page 108).

Please remember:

If you do not specify any of your own dialing rules, then the default settings will be used as entered on the Dialing Plans screen in the VoIP menu. All other calls are made via the Internet. If you press the * key twice before dialing the number on the phone, then the call will always be made via the fixed network. The dialing rules will not apply in this case.

Switching over takes a little time. For automatic dialing, insert a pause after the ** by pressing the recall key. You should therefore press: * key, * key, recall key and then the keys for the required phone number.

uQuick dial: Specify quick dial numbers or terms here for phone numbers you use fre- quently (see page 110).

Important information:

uIf VoIP is not set, you will always make calls via the fixed network and the dialing rules (see page 108) will not apply.

uAll calls from the fixed network are forwarded to the phone connected to the Phone 1 socket.

uIf VoIP is set, then – depending on your provider – a call-by-call number is preset for fixed network calls.

uPlease check these dialing rules (see page 108) and amend them if you have agreed special phone tariffs with another provider.

104