Administration and Status Information

Please remember:

If you ever forget your System Password, you will have to reset your Gigaset SX541 WLAN dsl (see page 18). Please bear in mind that this will restore all the settings to the factory configuration. No System Password will be active either.

Setting Idle time before log off:

ìEnter the period in minutes after which the configuration program is to be aborted if no entry is made. The default setting is 10 minutes. If you enter the value 0, the program will never be aborted automatically.

ìClick OK to accept the settings.

Setting up Remote Management

Remote Management enables a PC that is not in your local network to be used to configure the Gigaset SX541 WLAN dsl with a standard Web browser. You can permit Remote Management for one particular PC or for any PCs.

For security reasons, this function is only available if you have previously changed the system password for your device (see page 120).

ìIn the Administration menu, select Remote Management.

ìSelect the On option for Remote Management if you wish to permit Remote Man- agement.

You can start remote management by entering the public IP address in your Internet browser. As Internet providers often change this each time you dial in, it is worth using dynamic DNS (see page 90) in addition.

ìYou can change the Port via which you can access the configuration program from the Internet, for example in order to hide and protect the configuration program against unauthorised access.

121