Siemens SX541 WLAN dsl and, VoiP Settings, Use the default settings for, Configuring the Advanced Settings, ìSelect VoIP in the Telephony menu

Configuring the Advanced Settings

uYou should not change the default setting for the connection mode (= "permanent connection") if you are using VoIP (see page 55). You can only be called via VoIP if this setting is used. Please remember, though, that this setting can result in high connection costs if you have agreed a time-based tariff with your Internet provider.

uIf there is a power failure, or if you have switched off the Gigaset SX541 WLAN dsl, you can only make calls using a phone connected to the Phone 1 socket. The dialing rules will not apply in this case.

VoiP Settings

You will receive the access and configuration data for Internet telephony from your service provider.

ìSelect VoIP in the Telephony menu.ìSelect On if you want so use Internet telephony (default setting).

ìUse the default settings for Voice Quality: Voice activity detection, Comfort noise generation, Gain control and Fixed gain control (input/output).

ìTo add the data for your VoIP accounts, click Add.

When you have configured VoIP settings in the Basic Setup Wizard, the data of your VoIP account are shown in this line. You can edit this data or add new data for fur- ther accounts.

ìClick On to activate the VoIP account option.

105