Siemens SX541 WLAN dsl Configuring the Advanced Settings, USB, Menu, Internet, page 93), Telephony, Description, Local Network, Administration, Wireless Network, Advanced Settings

Configuring the Advanced Settings

Configuring the Advanced Settings

In the Advanced Settings menu, you can configure all the options for the Gigaset SX541 WLAN dsl. If you want, you can also make changes to the settings you made using the wizard. The following table shows the options in the menu.

Menu	Description
Internet	This menu comprises all the setting options relating to the
	Internet. In particular, you can
	u check and change the configuration for Internet access (see
	page 70) or specify a preferred DNS server (see page 74),
	u set up Traffic Control for your Internet access (see page 76),
	u configure the firewall, i.e. a number of security and special
	functions, for example access control for local PCs to the
	Internet or blocking certain Internet sites (see page 78),
	u make the NAT settings needed to provide your own services
	on the Internet (see page 85),
	u set up dynamic DNS for a static Internet address on your
	device (see page 90),
	u configure the Quality of Service (see page 92).
Local Network	You can change the Private IP address of the Gigaset SX541
	WLAN dsl here and make settings on the DHCP server (see
	page 93).
Wireless Network	You can configure the options here for wireless communication
	(SSID and encryption) and restrict access to the Gigaset SX541
	WLAN dsl (see page 69).
Telephony	You can make the settings here for Internet telephony (VoiP)
	and you can configure you extensions (see page 104).
USB	You can make the settings here for operating an external
	data carrier, a Web server, a file server or a printer server on the
	USB port (see page 111).
Administration	You can make or change various system settings here, for
	example assign a password (see page 120), set the time (see
	page 119), or activate remote management (see page 121).
	You can also back up the data on your Gigaset SX541 WLAN dsl
	or load new firmware (see page 123).

68