Siemens SX541 WLAN dsl PWR, USB, ADSL, LAN4, Line, Reset, LAN1 –, ON/OFF, Phone1, Element, Switch), Warning, connection, First Steps, Description, tory settings, ration settings

	First Steps
The back panel of the Gigaset SX541 WLAN dsl houses the sockets.
Element	Description
ADSL	Socket for connecting the integrated modem with the splitter’s DSL
	connection.
LAN1 –	Four 10/100 Mbps switch sockets with automatic recognition (RJ-45).
LAN4	You can connect up to four Ethernet devices (such as PCs, a Hub or
	Switch).
ON/OFF	Use this switch to power on or off the device.
PWR	Socket for the mains adapter supplied (12V 1A DC).
	Warning: Using the wrong power supply unit may damage the
	Gigaset SX541 WLAN dsl.
Reset	Reboot function: Press the button for longer than 1 second but less
	than 5 seconds to reboot the device. This does not affect the configu-
	ration settings.
	Reset function: Press the button behind the small opening on the bot-
	tom of the device for at least 5 seconds to return all settings to the fac-
	tory settings.
	Warning: This will clear all the configuration settings you have made.
	Updated firmware will not be affected.
USB	USB port for printer or USB bulk memory.
Phone1 / 2	Sockets for connecting analogue telephones.
Line	Socket for connecting the Gigaset SX541 WLAN dsl with the splitter’s
	telephone socket.

Setting up the Gigaset SX541 WLAN dsl

The Gigaset SX541 WLAN dsl can be set up in any suitable location in your home or office. You do not need any special wiring. However, you should comply with the following guidelines:

uOperate the Gigaset SX541 WLAN dsl only indoors within a temperature range of +5 to +40 °C. Do not position the Gigaset SX541 WLAN dsl near sources of heat. Do not cover the ventilation slots. High temperatures can damage the device.

uA mains socket for 220/240V~ and a connection socket for the splitter or LAN must be available where you set up the Gigaset SX541 WLAN dsl.

uDo not position the device in the immediate vicinity of stereo equipment, TV sets or microwave ovens. This may cause interference.

uPosition the Gigaset SX541 WLAN dsl so that it is as near to the centre of your wire- less network as possible. Make sure that where you position the Gigaset SX541 WLAN dsl provides optimum reception throughout the house or office. You can improve the reception quality by aligning the antenna (turn and/or tilt).

uPosition the Gigaset SX541 WLAN dsl on a non-slip surface. The router feet do not normally leave any traces on the surface they are on. However, some furniture sur- faces may contain substances that attack and soften the router's rubber feet. The feet may well mark the furniture surface in this case.

19