Siemens SX541 WLAN dsl Port, Always, Filter, Comment, Services, Protocol, Description, Access level, Schedule rule, 80,90-140,180, Schedule Rules, Access Control, Service filter

Configuring the Advanced Settings

ìSelect the Access rule type from the list:

–Apply to all clients: The rule applies to all PCs in your network.

–Specify IP address range: You select the PCs to which the rule is to apply by entering an IP address block.

–Specify IP address or Specify MAC address: The rule applies to a PC you select via the IP address or MAC address.

ìSelect a Schedule rule: The default setting is Always. You can create more Schedule Rules in the Access Control field (see page 84).

ìEnter a name for the Comment for the access rule.

ìDefine the Access level.

You can apply Deny access to the Internet, Allow web browsing with URL filter, Allow web browsing or make user-defined settings:

–Select whether the URL filters you have set (see page 82) are to be activated.

–If you wish to create a Service filter, activate this option.

–In Filtering mode, determine whether the services you select are to be allowed or blocked.

–Select the Services you wish to allow or block.

Select the Protocol and enter the appropriate Port (a single port number, several individual port numbers separated by commas, port blocks consisting of two port numbers separated by a dash, or any combination of these, for example 80,90-140,180). The Description displayed helps you to identify dif- ferent services.

–Activate the Filter option to use the relevant service for the service filter.

–You can also select services from the Predefined applications list.

83