LOADING THE BATTERY

A lithium-ion battery, BP-31, is provided with the DP1 camera. Charge the battery before using the camera for the first time. Charge the battery by the supplied battery charger, BC-31, when the battery is empty.

TO CHARGE THE BATTERY

1

Connect the power cable to the charger and insert the plug into the wall outlet.

2

Attach the battery by sliding it in the direction of the arrow, as shown in the diagram.

ƔCharge lamp will turn red during charging.

ƔIt takes about 120 minutes to recharge the battery.

ƔRequired time for recharging the battery depends on the ambient temperature and status of recharge level.

3

When the charge lamp turns green, charging is completed. Remove the battery from the charger and remove the power cable plug from the wall outlet.

ƔWe recommend charging the battery before using the camera again. If it is not used for several days, the battery performance decreases.

ƔIf the number of possible images from one charge of the battery considerably decreases, it may indicate the end of battery’s life. In this case, please purchase a new battery.

19

Page 20
Image 20
Sigma DP1 user manual Loading the Battery, To Charge the Battery