Silex technology PRICOM C-6400W manual Other functions, IP filtering

Users Manual CX2

Other functions

This chapter explains other functions about the PRICOM C-6400W. A web browser or TELNET is required for configuration.

-For further details on how to use the PRICOM C-6400W Web browser, TELNET or the procedure to change the PRICOM C-6400W configuration, refer to "Connect to the PRICOM C-6400W from a Web browser" or "TELNET" in this section.

IP filtering

The PRICOM can define scopes of IP addresses to allow or deny communication. When setting up for "DENY", communications from the designated IP address scope will be prohibited. When setting up "ALLOW", communication will be allowed only from the designated IP addresses. Up to 4 IP address scopes can be registered for the DENY/ALLOW functions. IP filtering can protect illegal access from unexpected network client users.

(Example)

To allow access from the IP address scope between 192.168.20.1-192.168.20.50 using a web browser;

1.Log in to the PRICOM via a web browser, then go to the "TCP/IP" tab.

2.Enter the necessary parameters at "IP filter Configuration" in the "TCP/IP" item. For this case, enable "ALLOW" at the Filter Mode, then enter 192.168.20.1 and 192.168.20.50 for both "Start Address" and "End Address" area respectively.

Appendix 30