12 Mounting
• Mount the DVD player with the head rest holder to the head rest in your vehicle
• Fasten the mounting plate with the four Phillips screws and washers on the rear of the DVD player. The arrow on the mounting plate should point upward.
•Place the mounting plate with the foam material side against the head rest and place the straps over and under the head rest.
•Tighten the straps firmly and close the Velcro fasteners.
•Insert the DVD player from above
into the mounting plate. Push the unit downward until it locks into place.
• Connect the supplied car adapter to DC IN (20) on the DVD player.
• Connect the car adapter to a well accessible 12V cigarette lighter jack or 12V vehicle power supply output jack. The car adapter LED lights up red during operation.
Note:
• Observe the safety instructions for
24
