Silvercrest DVT-480 user manual Display signal of AV device, Connect digital amplifier

11.4Display signal of AV device

•With the provided A/V cable you can connect A/V equipment, e.g. an external DVD player.

•Connect the video (yellow) and the audio (green) connectors to the VIDEO IN/OUT (23) and AUDIO IN/OUT (22) jacks on the DVD player.

•Connect the RCA connector to the corresponding colour-coded jacks on your TV set.

•Press MODE (28) to select AV INPUT.

•Now you will receive the signal of the external DVD player.

11.5Connect digital amplifier

• With an optical digital cable (not supplied) you can connect the DVD player to a digital amplifier.

• Connect the digital cable to OPTICAL OUT (22) on the DVD player and to the optical digital input of your amplifier.

Note:

•Select the setting SPDIF/RAW or SPDIF/PCM in the setup menu under Audio settings (page 42), depending on the connected amplifier.

23