Sima Products SUR-25 user manual Choosing a Device, Setting Up a New Timer, Choose Device

Macro Timers SUR-25 User Manual

Setting Up a New Timer

Press and hold the MACRO button on the Touch Screen for 3 seconds.

Press each number button (2, 4, 6, 8) until it disappears. Use the arrow buttons on the Touch Screen to select TIMR and then press the OK button.

1.Choose one of the eight available timers by pressing the number on the Touch Screen.

2.Use the arrow keys to select the timer type.

OFF : Off (no timer)

DAIL : Daily

SPEC : Specific Day/Time

1-5 : Every Mon – Fri

1-6 : Every Mon – Sat

SUN : Every Sunday

MON : Every Monday

TUE : Every Tuesday

WED : Every Wednesday

THU : Every Thursday

FRI : Every Friday

SAT : Every Saturday

Ch.

63. Press OK to confirm timer type.

Page

SUR-25 User Manual Choose Device

Choosing a Device

Before you can program the SUR-25 to operate your TV. VCR etc... you have to create a device screen for each device to use. Once programmed, devices are selected by pressing one of the eight device buttons located at the bottom of the unit. Keep pressing a button to cycle through the devices available with that button.

Each device button is capable of storing from 0 to 10 devices. For example, you may have two TVs stored in the TV button and three VCRs stored in the VCR button, while having nothing stored in the AUX button. The unit is capable of storing a total of ten devices using any combination of the 8 device buttons.

The display window in the upper right hand corner of the unit shows the name of the device or its “label”. If there is no device programmed for that button, it will display “EMPT” meaning empty.

When you create a new device you give it a name or “label”. After creating a device, you will be able to enter a pre-programmed code, “teach” an existing remote or customize the control layout to suit your needs. There are two ways to do this based on what starting point you want to work from:

•Create new Device: Use this method for setting up a new device.

•Modify Existing Device: Use this if you are having a problem with an already setup device and want to make a change or enhancement.

Ch.

3

Page

44 17