| Sleep mode |
| |
|
|
|
|
Using Sleep Mode
Sleep mode allows the
Touch Screen Buttons
Hard/Soft Buttons
start a Macro after a specified time delay. One example is you could use sleep mode to shut off a TV after you have already fallen asleep.
To use sleep mode: | 1 |
& |
1.Press and hold the BACKLIGHT (SLEEP) key for three seconds.
2.Use the arrow keys to specify the sleep timeout period in 10 minute increments. (24 hours maximum)
3.Press OK to confirm.
Select the Device using the device keys
4.Press the button you want the
Note: This key should already have a command or macro assigned to it. A macro can have up to 60 commands.
5.Press OK when finished. Note: If you want to cancel the Sleep function:
•Press and hold the BACKLIGHT (SLEEP) key for three seconds.
• Press Exit to cancel.
The touch screen buttons enable you to operate the SUR-
25 and external devices. Use these buttons to program codes from existing remotes, control your devices and set up macro command sequences. You will hear a beep when you press a button. To activate or deactivate the beep, please see Beep Toggling in Chapter 7. The
Rubber Buttons
The buttons on the bottom part of the
Page / Date Button: Toggles between Page 1 and
Page 2 of the Touch Screen buttons. If held down, the unit will also display the date and year in the upper right hand corner, followed by the day and the time .
Power Button: Can turn your devices on and off
but also during Touch Screen Layout will display all possible LCD choices.
Backlight / Sleep Button: Pressing it quickly will
turn on the backlight, while holding it down for three seconds will enter the SLEEP Menu.
Ch.
2
Page
11
