Simrad Reversible Pump RPU80/160/300
6 MAINTENANCE
6.1 Dismantling
After approximately 1000 operating hours, the pump unit should be removed for examination.
Close the stop cocks to the pump unit, remove the nuts on the 3 couplings and all retaining nuts.
Screw out the 2 fixing screws (24) located on each side of the pump cover which hold the valve block and motor together. (See figure
6.2 Electric motor
Examine the brushes for wear and replace if required.
6.3 Valve block
Examine the oil seal (15) for wear and replace if required.
24 | 20220422N |
