4. OTHER INFORMATION
SATIN STITCH FOOT
The satin stitch foot is grooved to permit dense stitching to pass under it easily. It is most useful for sewing satin stitches and as an alternative to the general purpose foot when sewing stretch stitches.
Closely spaced
TWIN NEEDLE (Optional)
A
When using a
Use of a Singer brand 3mm (Style 2025) twin needle is recommended. Twin needles are available in a range of sizes. Check with your Singer retailer.
The twin needle is an optional purchase.
THREADING THE TWIN NEEDLE
1. Insert the second spool pin. Place a spool on each spool pin. Thread the two threads as one. Draw one thread through each needle from front to back.
2. Pick up bobbin thread as for single needle sewing. Pull the three threads together under the presser foot to the back of the machine, leaving about 6” (15 cm) of thread.
NOTE: Needle threader cannot be used to thread the twin needle.
Helpful hints:
1. Always move the stitch width to the twin needle mark prior to selecting a pattern. This will preclude any possibility of the twin needle breaking.
2. Turning off the machine returns the machine to normal sewing mode. Twin needle is only active when the twin needle switch is lit red.
STRAIGHT STITCH NEEDLE POSITION
The position of the needle when sewing straight stitch may be adjusted to 13 different positions with the stitch width control as illustrated:
Toward left |
|
|
|
|
|
|
|
| Toward right |
Vers la gauche |
|
|
|
|
|
|
|
| Vers la droite |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
Hacia izquierda |
|
|
|
|
|
|
|
| Hacia derecha |
Width control
Contrôle de la largeur
Control ancho
52