1. Feed Cable Under | 4. Bring Cable Out To |
Rubber Seal Around | SIRIUS Receiver |
Hatch Opening | Location |
| ANTENNA |
3. Route Cable
Under Carpet
to Dashboard
2. Route Cable Under Interior
Trim, into Cabin and
Towards Front of Vehicle
Figure 13
Follow these detailed cable installation instructions:
1.Feed the antenna cable underneath the rubber weather stripping of the rear tail- gate window/door and route the cable along the rear hatch. Lift the weather strip- ping from the opening and tuck the cable inside it, then replace the weather strip- ping. Pull the cable out from weather stripping and route it into the cabin under the interior trim. Avoid hinges or gears that could crimp or cut the cable.
2.Route the cable through the SUV’s main cabin area under the interior trim, towards the front of the vehicle. Use a plastic putty knife to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with “SRS” logos.) Be careful not to crimp or cut the cable.
