Changing the Lock/Unlock Code
The first time you access the Lock/Unlock menu, you must enter the default lock code. The default lock code is 0 0 0 0. You can keep this code or change it. To change the lock code:
1.Select the Parental Control menu option. The Parental Control screen will appear (see Figure 71, on page 87)
2.Select the Edit Code menu option. The Enter Code screen will appear (see Figure 72).
Figure 72
3.Enter the default lock code (0 0 0 0) or the current lock code if you have changed it from the default code.
4.The New Code prompt will be displayed. Enter your new four digit code using the 0 – 9 number buttons. You will then be prompted to enter the new code again to confirm.
5.When the new lock code is confirmed, the lock code is changed.
Note: You can use this same procedure to change the lock code again after you have changed it from the default code.
