Environmental Statement, Manufacturing Materials | SMC Networks 10G

COMPLIANCES

Warnings and Cautionary Messages

Warning: This product does not contain any serviceable user parts.

Warning: Installation and removal of the unit must be carried out by qualified personnel only.

Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards.

Warning: This switch uses lasers to transmit signals over fiber optic cable. The lasers are compliant with the requirements of a Class 1 Laser Product and are inherently eye safe in normal operation. However, you should never look directly at a transmit port when it is powered on.

Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment.

Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Les raccordeurs ne sont pas utilisé pour le système téléphonique!

Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards.

Environmental Statement

The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means:

•Adherence to national legislation and regulations on environmental production standards.

•Conservation of operational resources.

•Waste reduction and safe disposal of all harmful un-recyclable by-products.

•Recycling of all reusable waste content.

•Design of products to maximize recyclables at the end of the product’s life span.

•Continual monitoring of safety standards.

End of Product Life Span

This product is manufactured in such a way as to allow for the recovery and disposal of all included electrical components once the product has reached the end of its life.

Manufacturing Materials

There are no hazardous nor ozone-depleting materials in this product.

Documentation

All printed documentation for this product uses biodegradable paper that originates from sustained and managed forests. The inks used in the printing process are non-toxic.

ix

Image 13

SMC Networks 10G manual Environmental Statement, End of Product Life Span, Manufacturing Materials, Documentation

Contents

TigerStack 10G Page TigerStack 10G Installation Guide Trademarks Limited Warranty SMC Networks, Inc Tesla Irvine, CA FCC Class a CompliancesIndustry Canada Class a Japan Vcci Class a CE Mark Declaration of Conformance for EMI and Safety EEC Taiwan Bsmi Class a Australia AS/NZS 3548 1995 Class a Safety ComplianceWarnhinweis Faseroptikanschlüsse Optische Sicherheit France and Peru only Power Cord Safety Vii Viii End of Product Life Span Environmental StatementManufacturing Materials Documentation Related Publications Purpose Table of Contents Making Network Connections Appendices Xiv Tables Xvi Figures Xviii Overview Chapter About Tigerstack 10G SMC8748M and SMC8724M Front Panels Switch Architecture Management Options Description of Hardware10/100/1000BASE-T Ports Stacking Ports SFP Slots Port LEDs Port Status LEDs Status LEDs System Status LEDs System Status LEDs Optional Redundant Power Unit Features and BenefitsPower Supply Receptacles Connectivity Performance ExpandabilityManagement About the Tigerstack 10G Chapter Network Planning Introduction to Switching Collapsed Backbone Application Examples Network Aggregation Plan Network Aggregation Plan Remote Connection with Fiber Cable Remote Connections with Fiber Cable Making Vlan Connections Making Vlan Connections Application Notes Selecting a Site Installing the Switch RJ-45 Connections Ethernet Cabling Package Contents Equipment ChecklistOptional Rack-Mounting Equipment Rack Mounting Mounting Attaching the Brackets Attaching the Adhesive Feet Desktop or Shelf Mounting Inserting an SFP Transceiver into a Slot Installing an Optional SFP Transceiver into the Switch Making Stacking Connections Connecting Switches in a Stack Stacking Topologies Power Receptacle Connecting to a Power Source Serial Port DB-9 DTE Pin-Out Connecting to the Console Port Installing the Switch Chapter Making Network Connections Connecting Network DevicesTwisted-Pair Devices Cabling Guidelines Making Twisted-Pair Connections Connecting to PCs, Servers, Hubs and Switches Wiring Closet Connections Network Wiring Connections Fiber Optic SFP Devices Making LC Port Connections 1000BASE-T Cable Requirements Connectivity RulesMbps Gigabit Ethernet Collision Length Maximum 1000BASE-T Gigabit Ethernet Cable Length Mbps Ethernet Collision Domain Mbps Fast Ethernet Collision Domain Cable Labeling and Connection Records Diagnosing Switch Indicators Appendix a TroubleshootingTable A-1 Troubleshooting Chart Installation Power and Cooling Problems Stack Troubleshooting In-Band Access Troubleshooting Twisted-Pair Cable and Pin Assignments Appendix B Cables 10BASE-T/100BASE-TX Pin Assignments Straight-Through WiringTable B-1 10/100BASE-TX MDI and MDI-X Port Pinouts Figure B-2 Straight-through Wiring Crossover Wiring Table B-2 1000BASE-T MDI-X and MDI Port Pinouts 1000BASE-T Pin Assignments Adjusting Existing Category 5 Cabling to Run 1000BASE-T Cable Testing for Existing Category 5 Cable Fiber Standards Physical Characteristics Appendix C Specifications Temperature WeightPower Supply Power Consumption Management Features Switch FeaturesStandards Safety WarrantyCompliances CE Mark Emissions Appendix D Ordering Information Ordering Information 1000BASE-T GlossaryAuto-Negotiation Collision BandwidthCollision Domain End Station Full Duplex Gigabit EthernetIeee Ieee 802.3ab Redundant Power Unit RPU Media Access Control MACRJ-45 Connector Switched Ports Virtual LAN Vlan Transmission Control Protocol/Internet Protocol TCP/IP Glossary-6 Numerics Index Index-2 Index-3 Index-4 Page For Technical SUPPORT, Call