INSTALLING THE SWITCH
Connecting to a Power Source
To connect a device to a power source:
1.Insert the power cable plug directly into the receptacle located at the back of the device.
100
Figure 3-7 Power Receptacle
2. Plug the other end of the cable into a grounded,
Note: For international use, you may need to change the AC line cord. You must use a line cord set that has been approved for the receptacle type in your country.
3.Check the
4.If you have purchased a Redundant Power Unit, connect it to the device and to an AC power source now, following the instructions included with the package.
