SMC Networks SMC2482W manual Click the APPLY button to complete the reset process

3.Click the [APPLY] button to complete the reset process.

4.The unit will reboot and reset the SMC2482W.

Using the Web-based Utility to reset the SMC2482W to factory defaults

1.Log into the SMC2482W using the Web-based Utility. (See section 4.2 for more information)

2.Click on [Tools] link on the left hand navigation menu, and then click the [Configuration Tools] option.

3.Click the [Default] button to reset the unit to factory defaults.

4. The unit will reboot and reset the SMC2482W to factory default.

Note: If you set the SMC2482W to be DHCP-enabled and changed the IP address or wireless settings on the SMC2482W, you will need to use the Windows Utility to re-configure the device so you can access the Web-based Utility again.

12