Allied Telesis AT-X210-16GT, AT-X210-9GT, AT-X210-24GT manual LEDs, Power

AT-x210-9GT, AT-x210-16GT, and AT-x210-24GT Switches Installation Guide

LEDs

POWER/

FAULT/ STANDBY LEDs

There are four types of LEDs on the AT-x210switches:

ˆ“POWER/FAULT/STANDBY LEDs” on page 13

ˆ“10Base-T/100Base-TX/1000 Base-T Link Activity LEDs” on page 15

ˆ“SFP LEDs” on page 17

The POWER LED reports the status of AC power and is located on the left side of the front panel of the AT-x210-9GT switch. See Figure 5.

POWER LED

CONSOLE

FAULT

RESET STANDBY

POWER RS-232

MODE

SP

SELECT

DU

Figure 5. POWER LED on AT-x210-9GT

Table 1 describes the POWER LED for the AT-x210-9GT switch.

Table 1. AT-x210-9GT POWER LED Functional Descriptions

LED	State	Description
POWER	Off	Indicates either the switch is not receiving
		AC power or the AC input power is operating
		outside the normal range.
	Steady	The switch is receiving AC input power and is
	Green	operating normally.

CONSOLE

FAULT

RESET STANDBY

POWER RS-232

L/A LINK / ACT

MODE SPEED / DUPLEX

L/A

1 3 5 7

MODE

MODE

SPEED

SELECT L/A

2 4 6 8

MODE

DUPLEX

FAULT LED

13