Allied Telesis AT-X210-9GT, AT-X210-24GT, AT-X210-16GT Electrical Safety and Emissions Standards

Electrical Safety and Emissions Standards

This product meets the following standards.

U.S. Federal Communications Commission

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

RFI Emissions	EN 55022:2010
	EN 61000-3-2:2006+A1:2009+A2:2009
	EN 61000-3-3:2008
	EN 62233:2008
	EN 62311:2008
	FCC Class A
	FCC Part 15 (47 CFR 15)
	ICES-003
	VCCI-A
	VCCI-B
	2004/108/EC EMC Directive

Warning: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Environmental	2011/65/EU RoHS Directive
Compliance
Electrical Safety	C-TICK
	CE
	2006/95/EC Low Voltage Directive
	EN 60950-1:2006+A11:2009+A1:2010+A12:2011
	IEC 60950-1 (ed.2)
	UL 60950 (CULUS)
Laser Safety	EN 60825-1:2007
Immunity	EN 55024:2010

i