Allied Telesis AT-X210-16GT, AT-X210-9GT, AT-X210-24GT manual

LEDs

Installation Options

Power Conservation

MAC Address Table

AT-x210-9GT, AT-x210-16GT, and AT-x210-24GT Switches Installation Guide

Here is a brief description of the port LEDs:

„Power LED/Fault/Standby LEDs; refer to “POWER/FAULT/ STANDBY LEDs” on page 13.

„Speed and link/activity LEDs for the twisted pair ports; see “10Base-T/100Base-TX/1000 Base-T Link Activity LEDs” on page 15.

„Link/activity LEDs for the SFP slots; see “SFP LEDs” on page 17.

The AT-x210-9GT switch can be installed in the following way:

„Mounted on a Desk or tabletop

The AT-x210-16GT and AT-x210-24GT switches can be installed in the following ways:

„Rack mounted in a19-inch equipment rack

„Mounted on a Desk or tabletop

„Wall mounted

The AT-x210-9GT, AT-x210-16GT, and AT-x210-24GT switches have the following power conservation features:

„High-efficiency power supply

„Power scaling based on traffic loads on ports operating at 1000 Mbps (Port power scaling not available at 10 or 100 Mbps)

„Power shutdown on unused ports

Here are the basic features of the MAC address table:

„Storage capacity up to 8KB MAC address entries

„Automatic learning and aging

7