Allied Telesis AT-X210-9GT, AT-X210-24GT manual Fitting brackets to the mounting for an AT-x210-9GT

Chapter 2: Installation

7.For AT-x210-9GTswitches, first fit the rack mount handles to the brackets using the supplied M3x6mm pan head screws, as shown below in Figure 21.

Figure 21. Fitting rack mount handles to the brackets for an AT-x210-9GT

8.After fitting the rack mount handles to the brackets using the supplied M3x6mm pan head screws , as shown about in Figure 21, fit these brackets with handles to the mounting for AT-x210-9GT switches using the supplied M4x6mm countersunk screws, as shown below in Figure 22.

Figure 22. Fitting brackets to the mounting for an AT-x210-9GT

32