INSTALLING THE SWITCH
Desktop or Shelf Mounting
1. Attach the four adhesive feet to the bottom of the first switch.
t m g M
t mg M
A7 | 8. |
A7 | 8. |
Figure 3-4 Attaching the Adhesive Feet
2.Set the device on a flat surface near an external power source, making sure there are at least two inches of space on all sides for proper air flow.
3.If installing a single switch only, go to Grounding the Chassis at the end of this chapter.
4.If installing multiple switches, attach four adhesive feet to each one.
Place each device squarely on top of the one below, in any order.
