Smeg STA4645U manual Additional functions, Switching off, Adjusting the water softener

USER INSTRUCTIONS EN

2.2.8 Switching off

At the end of the program, the dishwasher emits a short beep and the indica- tor lights of the fourth and fifth program (ref. pr. 4, pr. 5 fi g. 2-04) fl ash. Turn off the appliance by opening the door and pressing the on/off button (ref. 1 fi g. 2-02).

pr. 4	pr. 5
	Fig. 2-04

2.3Additional functions

2.3.1 Adjusting the water softener

N.B.: a different washing program from soak must be used to make the following adjustment..

Press and hold down the program delay button (ref. 7 fi g. 2-05) until the pre- set value appears followed by a dot (normally 3.). Release the button and then press it again and again until the required value is displayed, as indicated in the table (see tab. 2-03).

The 6 possible adjustment levels will appear in this sequence:

3., 4., 5., 0., 1., 2..

When the required value appears on the display, release the button; after 5 seconds the appliance automatically reverts to the program delay and the adjustment is set to the chosen value.

Rev 0.0 11