Smeg STA4645U manual Water hardness table see tab, User Instructions, Water Hardness

EN USER INSTRUCTIONS

N.B.: the display indicates the water hardness adjustment and the program delay. A dot (.) after the number means that the water hard- ness adjustment is being displayed. If no dot (.) appears, the pro- gram delay is being displayed.

Fig. 2-05

Water hardness table (see tab. 2-03)

		WATER HARDNESS
					SETTING
German degrees (°D)		French degrees (°F)		American degrees
				grains/galls
0	- 4	0	- 7	0 - 4.5	0.
5 - 15		8 - 25		4.6 - 14.5	1.
16	- 23	26	- 40	14.6 - 23.5	2.
24	- 31	41	- 60	23.6 - 35	3.
32	- 47	61	- 80	35.1 - 46.5	4.
48	- 58	81 - 100		46.6 - 58.5	5.

Tab. 2-03

Contact your local water board for information on the hardness of your water supply.

If it is necessary to open the door during the washing cycle, the program will be interrupted, the relative indicator light will continue to

flash and a beep will indicate that the cycle has not terminated. Wait for about 1 minute before closing the door and continuing with the program. When the door closes, the program will start from where it was interrupted. This operation should be performed only if neces- sary as it could cause irregular program performance.

12 Rev 0.0