Connecting to the water supply | Smeg STA4645U manual

5.2.1 Connecting to the water supply

EN	INSTALLATION INSTRUCTIONS

A through hole with a diameter of at least 8 cm (5/32”) is required to pass the hoses and power cord (ref. A ﬁ g. 5-05).

Make sure there area no rough edges that could damage the power cord or hoses. If the dishwasher is installed in a metal unit protect the edge of the through hole for the hoses and power cord with a gasket. Do not use exten- sion cords when making the electrical connection as these do not guarantee safety.

ATTENTION!

INSTALLING THE DISHWASHER IN A NARROW SPACE MAY BEND OR CRUSH THE POWER CORD. TAKE GREAT CARE IN ORDER TO REDUCE THE POSSIBILITY OF DAMAGING THE POWER CORD WHEN INSTALLING OR REMOVING THE APPLIANCE.

A

Fig. 5-05

5.2.1 Connecting to the water supply

PREVENTING THE RISK OF CLOGGING OR DAMAGE: IF THE WATER PIPE IS NEW OR HAS NOT BEEN USED FOR A LONG TIME, BEFORE CONNECTING TO THE WATER SUPPLY CHECK THAT THE WATER IS CLEAR AND FREE OF IMPURITIES, TO PRE- VENT DAMAGE TO THE APPLIANCE. THE DISHWASHER MUST

ALWAYS BE CONNECTED TO THE WATER SYSTEM WITH NEW HOSES; OLD OR USED HOSES MUST NEVER BE RE- USED.

16

Rev 0.0

Image 70

Smeg STA4645U manual Connecting to the water supply, Installation Instructions

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS INSTRUCTION MANUAL CONTENTS CONTENTSPage 1 INTRODUCTION INTRODUCTIONNomenclature of ﬁgures and tables Symbols used in this manual see tab This symbol highlights general information and warnings Tab USER INSTRUCTIONS 2 DESCRIPTION AND USE OF THE CONTROLS 2.1 Upper panel 2.2 Setting the washing program and switching on and off USER INSTRUCTIONS ETL SANITATION LISTED 2.2.3 End of program 2.2.1 Switching on2.2.2 Selecting and starting the program Before starting a washing program, make sure that 2.2.4 Interrupting a program 2.2.6 Canceling the current program2.2.5 Changing the current program 2.2.7 Options PROGRAM DELAY 2.3 Additional functions 2.2.8 Switching off2.3.1 Adjusting the water softener 3., 4., 5., 0., 1 Water hardness table see tab WATER HARDNESS 3 ENERGY SAVING AND ENVIRONMENTAL RESPECT 4 REMOVING THE DISHES 5 TROUBLESHOOTING Alarms E1, E3, E4, immediately terminate the current program Contents Page This manual comprises the following sections Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations. Following the cleaning instruc- tions provided here will keep dishwasher performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasher Symbols used in this manual see tab WARNINGS 2 IMPORTANT SAFETY INSTRUCTIONSave this instructions WARNINGS ONLY USE RINSE-AID SPECIALLY FORMULATED FOR DOMESTIC DISHWASHERS DO NOT INTRODUCE ANIMALS INTO THE DISHWASHER DO NOT LEAN AGAINST OR STAND ON THE DISHWASHER RACKS ATTEMPT TO REPAIR THE APPLIANCE THE MANUFACTURER DECLINES ALL RESPONSIBIL- ITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPER- TY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS INSTALLATION INSTRUCTIONS 3 INSTALLATION AND HOOK-UP INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS adjust the water softening system add the regenerating salt 4 OPERATING INSTRUCTIONSadd the rinse-aid and detergent 4.1 Using the water softening system When using the dishwasher for the ﬁ rst time, in addition to the salt it is also necessary to add one liter of water to the container 4.2 Using the rinse-aid and detergent dispensers ED AS REQUIRED 4.2.2 Adjusting the rinse-aid dispenser setting 4.2.1 Adding the rinse-aid 4.2.3 Adding the detergent When a program with hot prewash is selected see program table in the “De- scription of Controls” manual, extra detergent must be placed in the cavity ref. A or B ﬁ g. 4-06, depending on models 4.3 General warnings and recommendations Items which are not dishwasher-safe MAKE SURE that the items being washed are dishwasher-safeDishes and objects in copper, tin, zinc or brass these tend to stain 4.4 Using the racks 4.4.1 Lower rack Con supporti fissi Esempi di caricamento Loading the lower rack see ﬁ gLoading examples 4.4.2 Cutlery basket see ﬁ g 4.4.3 Upper rack vedi ﬁ g. 4-12 Loading the upper rack vedi ﬁ g EsempiLoading caricamentoexamples Adjusting the upper rack 5.1 General warnings and recommendations 5 CLEANING AND USER-MAINTENANCENEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO CLEAN THE APPLIANCE 5.3 Cleaning the spray arms 5.2 Cleaning the water intake ﬁlter only some modelsRemoving the spray arms USER INSTRUCTIONS 5.4 Cleaning the ﬁlter unit 5.5 General warnings and recommendations for correct maintenance Prolonged disuse 5.6 Troubleshooting minor problemsIf the dishes do not come out clean, check that Before starting the dishwasher after prolonged disuse If the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank 6 TECHNICAL DATA SEE TAB CONTENTS ContentsPage 1 INTRODUCTION INTRODUCTIONNomenclature of ﬁgures and tables Symbols used in this manual see tab 2 SAFETY INFORMATION EDGE OF THE DOOR MUST NEVER BE REMOVED TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER REPAIR THE APPLIANCE WARNINGS B A D C F 3 INSTALLATION MATERIALINSTALLATION INSTRUCTIONS G I L 3.1 Kit supplied with dishwasher models sta4645/sta8743 3.2 Kit supplied with dishwasher models pla8743 DIMENSIONS OF DISHWASHER See ﬁ g 5 INSTALLATION AND HOOK-UP Only for free-standing models 5.1 Leveling 5.1.1 Mounting the feet only for some models 5.1.2 Levelling the appliance 5.2 Connections FIRE HAZARD DO NOT COVER OR CRUSH THE CORD PLUG 5.2.1 Connecting to the water supply 5.2.1.1 Connecting to the water tap Do not cut the inlet hose see ﬁ g 3-59/64” 5.2.1.2 Connecting the drain hose Connecting to a drainMAX 100 cm min O4 cm Connecting to a “T” union of the drain circuit Available from any plumbing stockist Connecting to a waste disposal unit with an air gap Connecting to the air gap no waste disposal unit Connecting to a waste disposal unit no air gap A D C B 5.2.2 Electrical connections and warnings Grounding instructions 5.3.1 Installation procedure all models 5.3 Commissioning INSTALLATION INSTRUCTIONS 5.3.2 Procedure for mounting the door panel Mount the door panel see ﬁ g Secure the door to the panel with the supplied screws. The panel must have a minimum thickness of 20 mm 25/32” see ﬁ g INSTALLATION INSTRUCTIONS 5.3.3 Procedure for mounting the door panel models pla8743 INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 5.3.4 Completion of installation all models Remove the adhesive band on the gasket see ﬁ g INSTALLATION INSTRUCTIONS 5.4 Testing 19 570 0074