Smeg STA4645U manual Troubleshooting, User Instructions

USER INSTRUCTIONS EN

5 TROUBLESHOOTING

The dishwasher can to signal a number of malfunctions by turning on various indicator lights, as described below (see following table):

FAULT	DESCRIPTION
	Acquastop failure
E1	The anti-flooding system has tripped (only for models
	fitted with this feature). Activates in case of water leaks.
	Contact the technical assistance service.
	Water heating malfunction
E3	The water is not	heated or is incorrectly heated.
	Repeat the washing program; if the problem persists,
	contact the technical assistance service.
	Water temperature monitoring malfunction
	Interrupt the current program. Switch off the
E4	dishwasher, switch it back on again, program a new
	cycle and press start. If the problem persists, contact
	the technical assistance service.
	Water intake malfunction
	The appliance does not take in water or does so
E5	incorrectly. Make	sure the water connections are
	correct, that the water supply tap is open and that the
	filter is not clogged. If the problem persists, contact
	the technical assistance service.
	Water pump-out malfunction
	The appliance does not pump out the water or does
E6	so incorrectly. Make sure the drain hose is not kinked
	or crushed and that the siphon and filters are not
	clogged. If the problem persists, contact the technical
	assistance service.
		Tab. 4-01
Light off	Light on	Light flashing

Rev 0.0 15